How to Clean Wood Furniture - The Best Way to Clean Wood Furniture

How to clean wood furniture is a common question from people all over the world. Whether it's a dining table or chairs, a coffee table or end table, a chest or wardrobe, there is no better way to clean wood than with microfibers. Microfibers are tiny fibers that are made of ultra-soft synthetic materials, just like the human hair. These fibers can be spun onto a ball and then spread onto the hardwood surface with a very effective vacuum cleaner. Once the microfibers have sat long enough, they can be vacuumed away with a vacuum cleaner. The result is a shine that is simply not possible with any other cleaning method.

Using a microfiber cloth to get rid of dirt, dust, moisture, even mildew! The fine, small hairs of microfibers will keep any dirt and moisture from penetrating deep into your wood furniture's surface, while simultaneously absorbing virtually any liquid residue that might cling to the surface. This makes dusting quite easy - a job that could take hours to complete if done with a traditional vacuum cleaner. You'll see a huge difference in how clean your wood surfaces look and feel once you have finished dusting. The dust will simply roll right off of your pieces!

How to Clean Wood Furniture - Drying the Area Before you begin any cleaning process, make sure that the surface is completely dry. Using a dry cloth, apply a light layer of lubricant (cleaning spray, oil, or automotive grease) to the area and then rub down the dry cloth with a soft, dry cloth. Make sure that the lint-free cloth is completely dry before moving on to the next step of the process. A great tip for drying your piece before putting it away in a closet or storage container is to place it in a plastic sheeting and leave it out in the sun to dry. Sunlight can quickly evaporate any water remaining on a wet piece and this will help speed up the drying time.

How to Clean Wood Furniture - With the surface prepared, you're ready to start the actual cleaning process. Use a soft, dry cloth to dab at the wood gently and give each spot a very light coating of lubricant (your choice). Do not use a very thick or aggressive cloth as you may scratch the material.

How to Clean Wood Furniture - After applying the lubricant and wiping away excess liquid, you are ready to begin the actual cleaning process. Now is the best time to be careful about what you're touching and what you're pushing against. Never, ever scrape or tap wood surfaces; never use a dry, hard object to wipe away dirt or residue. Instead, use a dry, soft cloth or a soft, wet rag to carefully wipe away whatever excess dirt you may find. You should also never, ever use a brush or any kind of hard tool to clean wood furniture - even a hair dryer is too hard and will likely damage the material.

How to Clean Wood Furniture - To remove the dust that has built up over time, take a soft, dry cloth and dampen it with a bit of water or dry erase board. Rub the material very gently, starting on the outside and working towards the center. When you have all the dust removed, you can apply a thin coat of stain or polish to the entire piece. This finish will protect your new furniture from cracking and fading in the sunlight and from accidental spills.

How to Clean Wood Furniture - If the stain is already stained and you want to save yourself some trouble, you may need to strip the paper off of the backing before applying the cleaner. Take a clean wet rag and dip it in the cleaner and scrub it into the stain. When you've finished scrubbing, rinse the rag and use it to wipe down the entire piece. This step may need to be repeated if the stain remains. After applying the stain remover, dab the area with a clean sponge and allow it to air dry. When it has dried, you can apply the final coat of stain remover and you are ready for years of use.

How to Clean Wood Furniture - When you have completed the previous steps, you may need to apply some mineral spirits to help get the buildup under control. For best results, you should apply the mineral spirits directly onto the stain allowing it to penetrate the pores. Allow the solution to sit for a few minutes, then blot up the mineral spirits with a clean, dry cloth. After this step, you can simply buff the area to make it look as good as new. If you feel the need to add a little extra shine to the furniture, you may need to use a small amount of oil.

Leave a Reply

Your email address will not be published. Required fields are marked *